产品中心

一般信息

安徒尔555是一种ISO100二酯基合成压缩机润滑油,专门为提供长期润滑在过程气体压缩机。

应用程序

用于使用下列气体的往复式压缩机和真空泵的汽缸和车架润滑:

空气二氧化碳(干式)硫化氢(干式)丙烷     

丁烯乙烯天然气合成气 

一氧化碳氦甲烷六氟化硫 

炉(裂纹)气体氢氮

名义经营范围为-15℃至230℃(5℃至445℃)

批准

安徒尔合成润滑油是唯一的寿命长的合成润滑油超过20年的成功性能。他们是现场测试,批准或推荐大多数主要压缩机制造商.您是否有任何关于安徒尔555压缩机润滑剂是否适合某一制造商的模型压缩机的问题,请与安徒尔润滑剂供应商或联系安徒尔公司。

优点

*无金属添加剂干扰催化工艺

*石油变化较少

*石油消费减少

*减少压缩机维修

*消除提花和沉淀

*大大减少火灾和爆炸危险

*减少能源消耗

*快速分离水凝结物

相容性

建议使用以下密封件、油漆和塑料来与 Anderol 合成润滑剂接触。还显示了不推荐的材料。有关其他材料的更多信息，请参阅我们的“兼容性指南”。

推荐- 氟橡胶、高丁腈橡胶 N、聚四氟乙烯、环氧涂料、耐油醇酸树脂、尼龙、Delrin、Celcon 和 PBT。

不推荐- 氯丁橡胶、SBR 橡胶、低丁腈橡胶 N、丙烯酸涂料、清漆、聚苯乙烯、PVC 和 ABS。

GENERAL INFORMATION

ANDEROL 555 is an ISO 100 diester based synthetic compressor lubricant specifically designed to provide long term lubrication in process gas compressors.

APPLICATIONS

For cylinder and frame lubrication of reciprocating compressors and vacuum pumps using the following gases:

Air                                Carbon Dioxide (dry)      Hydrogen Sulphide (dry)     Propane     

Butadiene                      Ethylene                       Natural Gas                        Synthesis Gas 

Carbon Monoxide           Helium                          Methane                             Sulphur Hexafluoride 

Furnace (crack) Gas       Hydrogen                      Nitrogen

Nominal Operating Range is –15°C to 230°C (5°F to 445°F)

APPROVALS

ANDEROL synthetic lubricants are the only long-life synthetic lubricants with over 20 years of successful performance. They are field tested, approved or recommended by most major compressor manufacturers. Should you have any questions regarding the suitability of ANDEROL 555 compressor lubricant for a specific manufacturer's model compressor, please check with your ANDEROL lubricant supplier or contact Anderol Inc.

ADVANTAGES

• No metallic additives to interfere with catalytic processes

• Fewer oil changes

• Lower oil consumption

• Reduces compressor maintenance

• Eliminates lacquering and deposits

• Greatly reduces fire and explosion hazard

• Reduces energy consumption

• Separates water condensate rapidly

COMPATIBILITY

The following seals, paints, and plastics are recommended for use in contact with Anderol Synthetic Lubricants. Materials not recommended are also shown. For more information on other materials, see our "Compatibility Guide."

RECOMMENDED - Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin, Celcon, and PBT.

NOT RECOMMENDED - Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystyrene, PVC, and ABS.