MOTOREX 瑞士摩托瑞斯 用于主轴冷却系统的莫特雷克斯冷却剂,准备使用25升
+
  • MOTOREX 瑞士摩托瑞斯 用于主轴冷却系统的莫特雷克斯冷却剂,准备使用25升

MOTOREX 瑞士摩托瑞斯 用于主轴冷却系统的莫特雷克斯冷却剂,准备使用25升

MOTOREX COOL-X Coolant for spindle cooling systems, ready to use 25l

关键词:

产品咨询:

  • 产品描述
    • 商品名称: MOTOREX 瑞士摩托瑞斯 用于主轴冷却系统的莫特雷克斯冷却剂,准备使用25升

    MOTOREX COOL-X Coolant for spindle cooling systems, ready to use 25l

    莫特雷克斯库尔-X是一种现成的冷却剂,可用于高性能纺锤的腐蚀保护。
    这些成分使各种材料钝化,并长期保护它们免受腐蚀。冷却-X是一种非常有效的冷却剂,其比热为4.1J/G-K,几乎与水(4.187J/G-K)相同。

    特征
    • 准备使用
    • 很有效率
    • 散热
    • 防止电化学腐蚀
    • 有效保护铝、有色和有色金属免受腐蚀
    • 不会攻击电镀零件
    • 维修费低
    • 与机械工程中常用塑料和密封材料的相容性测试和确认
    • 体积:25升
    • 也可购买:60升,198升桶
    申请
    • 冷却-X可以使用,浓度为11%。不要加水.
    • 20-25℃的平均运行温度对长期保护弹性体非常有效。
    • 如果使用条件最佳,且使用说明得到遵守,则冷却剂可在原来的容器中封闭5-35℃时保存最多两年。
    • 一般而言,不应暴露在温度低于0℃的情况下。
    • 它在-9摄氏度的温度下结冰。
    • 如果在运输和冷冻过程中,莫特雷克斯库尔-X暴露在霜中,它可以达到最低温度。+5°C可再次解冻。
    • 确保液体完全解冻。
    • 解冻后将容器摇匀。
    • 最大值。在封闭原装容器中的储存时间为一年.
    维持费
    • COOL-X 必须按照主轴或机器制造商的规格定期检查(请注意背面的维护说明)。
    • 如果要用 COOL-X 更换第三方产品,则必须用 3% CS-CLEANER 更换冷却系统并处理 48 个运行小时。
    • 请注意主轴制造商的维护说明。

     

    技术规格
    • ​颜色(DIN ISO 2049):荧光绿
    • 20 °C 时的密度 (ASTM D 4052):1.010 g/ml
    • PH值范围(DIN 51785):8.0 - 8.7
    • 凝固点 (ASTM D 5950):-9 °C
    • 应用范围:4 - 80 °C
    • 折光仪读数:*1.9 % Brix-1
    • 水危害等级:WGK1
    • 处置代码:VeVA / EWC 120109

     

     

    MOTOREX COOL-X is a ready-to-use coolant with corrosion protection for high-performance spindles.
    The ingredients passivate the various materials and protect them against corrosion in the long term. COOL-X is a very efficient coolant with a specific heat of 4.1 J / g-K, which is almost as good as that of water (4.187 J / g-K).

    Characteristics
    • Ready to use
    • Very efficient
    • Heat dissipation
    • Prevents electrochemical corrosion
    • Effectively protects aluminum, nonferrous and ferrous metals against corrosion
    • Galvanized parts are not attacked
    • Low maintenance
    • Compatibility with the plastics and sealing materials commonly used in mechanical engineering tested and confirmed
    • Volume: 25L canister
    • Also available as: 60L, 198L barrel
    Application
    • COOL-X is ready to use, 11% concentration. do not add any water.
    • An average operating temperature of 20 - 25 ° C is very effective in protecting elastomers in the long term.
    • If the conditions of use are optimal and the instructions for use are complied with, the coolant can remain in use for up to 2 years storage Store the MOTOREX COOL-X closed in the original container at 5 - 35 ° C.
    • In general, MOTOREX COOL-X should not be exposed to temperatures below 0 ° C.
    • It freezes at a temperature of - 9 ° C.
    • If the MOTOREX COOL-X is exposed to frost during transport and freezes, it can reach temperatures of min. + 5 ° C can be thawed again.
    • Make sure that the liquid is completely thawed.
    • Shake the container well after thawing.
    • The max. storage time in the closed original container is 1 year.
    Maintenance
    • COOL-X must be checked periodically in accordance with the specifications of the spindle or machine manufacturer (please note the maintenance instructions on the back).
    • If a third-party product is to be replaced by COOL-X, the cooling system must be replaced with 3% CS-CLEANER for 48 operating hours be treated.
    • Please note the maintenance instructions of the spindle manufacturer.

    Note: You can find the Motorex CS Cleaner here !

    Technical specifications
    • ​Color (DIN ISO 2049): fluorescent green
    • Density at 20 °C  (ASTM D 4052): 1.010 g/ml
    • PH value range (DIN 51785): 8.0 - 8.7
    • Solidification point (ASTM D 5950): -9 °C
    • Application range: 4 - 80 °C
    • Reading value of refractometer:  *1.9 % Brix-1
    • Water hazard class: WGK1
    • Disposal code: VeVA / EWC 120109

     

相关产品

暂无数据

暂无数据

相关新闻

免费获取产品报价