MOTOREX 瑞士摩托瑞斯 用于主轴冷却系统的混合冷却剂
+
  • MOTOREX 瑞士摩托瑞斯 用于主轴冷却系统的混合冷却剂

MOTOREX 瑞士摩托瑞斯 用于主轴冷却系统的混合冷却剂

MOTOREX COOL-X Coolant for spindle cooling systems ready to use 200L

关键词:

产品咨询:

  • 产品描述
    • 商品名称: MOTOREX 瑞士摩托瑞斯 用于主轴冷却系统的混合冷却剂

    MOTOREX COOL-X Coolant for spindle cooling systems ready to use 200L

    MOTOREX COOL-X 是一种即用型冷却液,可为高性能主轴提供防腐蚀保护。
    这些成分可以钝化各种材料并保护它们长期免受腐蚀。COOL-X 是一种非常高效的冷却剂,比热为 4.1 J/gK,几乎与水的比热 (4.187 J/gK) 一样好。

    特征
    • 可以使用
    • 非常高效
    • 散热
    • 防止电化学腐蚀
    • 有效保护铝、有色金属和黑色金属免受腐蚀
    • 镀锌件不受侵蚀
    • 低维护
    • 与机械工程中常用的塑料和密封材料的兼容性经过测试和确认
    • 容积:200L桶
    • 也可提供:25L 罐装、60L 桶装
    应用
    • COOL-X 即用型,浓度 11%。不要添加任何水。
    • 20 - 25 °C 的平均工作温度对于长期保护弹性体非常有效。
    • 如果使用条件最佳且遵守使用说明,冷却剂可在长达 2 年的储存时间内继续使用。 将 MOTOREX COOL-X 密封在原始容器中,在 5 - 35 °C 下储存。
    • 一般来说,MOTOREX COOL-X 不应暴露在低于 0°C 的温度下。
    • 它在零下9°C的温度下结冰。
    • 如果 MOTOREX COOL-X 在运输过程中暴露于霜冻并结冰,其温度可能会达到最低。+5℃可再次解冻。
    • 确保液体完全解冻。
    • 解冻后充分摇匀容器。
    • 最大。在密闭的原始容器中的储存时间为1年。
    维护
    • 必须根据主轴或机器制造商的规格定期检查冷却X(请在背面注明维修说明)。
    • 如果一个第三方产品要替换为冷-X,冷却系统必须替换为3%的CS-清洁48小时的处理。
    • 请注意主轴制造商的维修说明.

     

    技术规格
    • (国际标准化组织国际标准化组织国际标准2049):荧光绿色
    • 20℃时的密度(ASTMD4052):1.010克/毫升
    • PH value range (DIN 51785): 8.0 - 8.7
    • 凝固点(ASTM5950):-9℃
    • Application range: 4 - 80 °C
    • 折射计的读数值:*1.9%
    • 水危害等级:WGK1
    • 处置码:VEVA/EW120109

     

     

    MOTOREX COOL-X is a ready-to-use coolant with corrosion protection for high-performance spindles.
    The ingredients passivate the various materials and protect them against corrosion in the long term. COOL-X is a very efficient coolant with a specific heat of 4.1 J / g-K, which is almost as good as that of water (4.187 J / g-K).

    Characteristics
    • Ready to use
    • Very efficient
    • Heat dissipation
    • Prevents electrochemical corrosion
    • Effectively protects aluminum, nonferrous and ferrous metals against corrosion
    • Galvanized parts are not attacked
    • Low maintenance
    • Compatibility with the plastics and sealing materials commonly used in mechanical engineering tested and confirmed
    • Volume: 200L barrel
    • Also available as: 25L canister, 60L barrel
    Application
    • COOL-X is ready to use, 11% concentration. do not add any water.
    • An average operating temperature of 20 - 25 ° C is very effective in protecting elastomers in the long term.
    • If the conditions of use are optimal and the instructions for use are complied with, the coolant can remain in use for up to 2 years storage Store the MOTOREX COOL-X closed in the original container at 5 - 35 ° C.
    • In general, MOTOREX COOL-X should not be exposed to temperatures below 0 ° C.
    • It freezes at a temperature of - 9 ° C.
    • If the MOTOREX COOL-X is exposed to frost during transport and freezes, it can reach temperatures of min. + 5 ° C can be thawed again.
    • Make sure that the liquid is completely thawed.
    • Shake the container well after thawing.
    • The max. storage time in the closed original container is 1 year.
    Maintenance
    • COOL-X must be checked periodically in accordance with the specifications of the spindle or machine manufacturer (please note the maintenance instructions on the back).
    • If a third-party product is to be replaced by COOL-X, the cooling system must be replaced with 3% CS-CLEANER for 48 operating hours be treated.
    • Please note the maintenance instructions of the spindle manufacturer.

     

    Technical specifications
    • ​Color (DIN ISO 2049): fluorescent green
    • Density at 20 °C  (ASTM D 4052): 1.010 g/ml
    • PH value range (DIN 51785): 8.0 - 8.7
    • Solidification point (ASTM D 5950): -9 °C
    • Application range: 4 - 80 °C
    • Reading value of refractometer:  *1.9 % Brix-1
    • Water hazard class: WGK1
    • Disposal code: VeVA / EWC 120109

     

相关产品

暂无数据

暂无数据

相关新闻

免费获取产品报价