产品中心

MOTOREX COOL-X 是一种现成的冷却剂,可对高性能的纺锤进行腐蚀保护。MOTOREX COOL-X 成分使各种材料钝化,并长期保护它们免受腐蚀。MOTOREX COOL-X是一种非常有效的冷却剂,其比热为4.1J/G-K,几乎与水(4.187J/G-K)相同。

MOTOREX COOL-X 是一种现成的冷却剂,可对高性能的纺锤进行腐蚀保护。
MOTOREX COOL-X 成分使各种材料钝化,并长期保护它们免受腐蚀。MOTOREX COOL-X是一种非常有效的冷却剂,其比热为4.1J/G-K,几乎与水(4.187J/G-K)相同。

特征

• 准备使用
• 很有效率
• 散热
• 防止电化学腐蚀
• 有效保护铝、有色金属和黑色金属免受腐蚀
• 镀锌件不受侵蚀
• 低维护
• 与机械工程中常用的塑料和密封材料的兼容性经过测试和确认
• 容积：200L

应用

• COOL-X AW 即用型，浓度为 26%。不要添加任何水。
• 20 - 25 °C 的平均工作温度对于长期保护弹性体非常有效。
• 如果使用条件最佳且遵守使用说明，冷却液可在长达 2 年的储存时间内继续使用。 将 MOTOREX COOL-X AW 密闭存放在原始容器中，温度为 5 - 35 °C。
• 一般来说，MOTOREX COOL-X AW 不应暴露在低于 0°C 的温度下。
• 它在零下23°C的温度下结冰。
• 如果在运输和冷冻过程中,该超敌百虫暴露在霜中,它可以达到最低温度。+5°C可再次解冻。
• 确保液体完全解冻。
• 解冻后将容器摇匀。
• 最大值。在封闭原装容器中的储存时间为一年.

维持费

• 必须根据主轴或机器制造商的说明书定期检查冷却-X型水冷(请在背面注明维修说明)。
• 如果一个第三方的产品要替换为冷-X-亚法,冷却系统必须替换为3%的CS-清洁48小时的处理。
• 请注意主轴制造商的维修说明.

技术规格

• (国际标准化组织国际标准化组织国际标准2049):绿色
• 20 °C 时的密度 (ASTM D 4052)：1.036 g/ml
• PH值范围（DIN 51785）：8.0 - 8.7
• 凝固点 (ASTM D 5950)：-23 °C
• 应用范围：4 - 80 °C
• 折光仪读数：*1.4 % Brix-1
• 水危害等级：WGK1
• 处置代码：VeVA / EWC 120109

MOTOREX COOL-X AW is a ready-to-use coolant with corrosion protection for high-performance spindles.
MOTOREX COOL-X ingredients passivate the various materials and protect them against corrosion in the long term. COOL-X is a very efficient coolant with a specific heat of 4.1 J / g-K, which is almost as good as that of water (4.187 J / g-K).

Characteristics

• Ready to use
• Very efficient
• Heat dissipation
• Prevents electrochemical corrosion
• Effectively protects aluminum, nonferrous and ferrous metals against corrosion
• Galvanized parts are not attacked
• Low maintenance
• Compatibility with the plastics and sealing materials commonly used in mechanical engineering tested and confirmed
• Volume: 200L

Application

• COOL-X AW is ready to use, 26% concentration. do not add any water.
• An average operating temperature of 20 - 25 ° C is very effective in protecting elastomers in the long term.
• If the conditions of use are optimal and the instructions for use are complied with, the coolant can remain in use for up to 2 years storage Store the MOTOREX COOL-X AW closed in the original container at 5 - 35 ° C.
• In general, MOTOREX COOL-X AW should not be exposed to temperatures below 0 ° C.
• It freezes at a temperature of - 23 ° C.
• If the MOTOREX COOL-X AW is exposed to frost during transport and freezes, it can reach temperatures of min. + 5 ° C can be thawed again.
• Make sure that the liquid is completely thawed.
• Shake the container well after thawing.
• The max. storage time in the closed original container is 1 year.

Maintenance

• COOL-X AW must be checked periodically in accordance with the specifications of the spindle or machine manufacturer (please note the maintenance instructions on the back).
• If a third-party product is to be replaced by COOL-X AW, the cooling system must be replaced with 3% CS-CLEANER for 48 operating hours be treated.
• Please note the maintenance instructions of the spindle manufacturer.

Technical specifications

• ​Color (DIN ISO 2049): green
• Density at 20 °C  (ASTM D 4052): 1.036 g/ml
• PH value range (DIN 51785): 8.0 - 8.7
• Solidification point (ASTM D 5950): -23 °C
• Application range: 4 - 80 °C
• Reading value of refractometer:  *1.4 % Brix-1
• Water hazard class: WGK1
• Disposal code: VeVA / EWC 120109