产品中心

Klüberplex AG 11-462 White operating and priming lubricant 25kg

Klüberplex AG 11-461 和 462 具有非常好的耐磨和防腐蚀保护性能，有助于高负载装置和组件的高效运行。
这些粘性润滑脂已被证明多年有效，即使在暴露于盐水或长时间停用期间也能为组件提供可靠的保护。

• 体积：25公斤桶
• 提供 450 克筒装、400 毫升喷雾罐、1 公斤罐装、25 公斤桶装

您的优势一目了然

• 减少维护需求
  • 由于使用白色固体润滑剂和润滑剂消耗量低，机器环境污染小
  • 即使在低温下也有很好的附着力
  • 由于该产品适用于齿轮/小齿轮驱动和轴承，因此可以简化产品
• 改进的组件性能
  • 由于选择了固体润滑剂和添加剂，减少了磨损
  • 当暴露在盐水中时也有很好的防腐蚀保护

应用
Klüberplex AG 11-461 和 462 被设计为齿轮和小齿轮驱动的启动润滑剂，也可用作检查驱动负载模式的对比润滑剂。
在近海领域，使用 Klüberplex AG 11- 可以有效地润滑和保护受盐水影响的海洋应用和风力发电站、开式齿轮、低速滚动轴承、滑动和导轨、绞车或起重机的钢缆以及类似部件461 和 462。

应用说明：

启动润滑
Klüberplex AG 11-461 和 462 用刷子或抹刀涂抹。
为获得最佳效果，我们建议在润滑前清洁待润滑表面。
为了确定适合您的应用的正确数量，背页的图表提供了指导值。

操作润滑
Klüberplex AG 11-461 和 462 可通过手动操作的黄油枪或通过适当的中央润滑系统进行涂抹，并且可在低至 0 °C 的温度下喷涂。
当通过喷雾应用时，排气装置是必要的，以避免吸入喷雾（见 SDS 第 2 点）。
如果确保有足够的再润滑，则允许高达 200°C 的短期热负荷。要使用的润滑剂数量取决于操作条件，并且必须针对每个应用单独确定。长时间暴露在强烈的阳光下可能会轻微改变润滑剂的表面颜色，而不会影响其性能。

产品数据：

Klüberplex AG 11-461 and 462 offer very good wear and corrosion protective properties contributing to an efficient operation of your highly loaded installations and components.
These adhesive greases have proven effective for many years, providing reliable protection of components also when exposed to salt water or during extended periods of standstill.

• Volume: 25 kg bucket
• Available in 450 g cartridge, 400 ml spray can, 1kg can, 25kg bucket

Your benefits at a glance

• Reduced maintenance needs
  • low contamination of machine environment due to use of white solid lubricants and low lubricant consumption
  • very good adhesion even at low temperatures
  • product streamlining possible as the product is suitable for gear rim / pinion drives and bearings
• Improved component performance
  • less wear due to selected solid lubricants and additives
  • very good corrosion protection also when exposed to salt water

Application
Klüberplex AG 11-461 and 462 have been designed as priming lubricants for gear rim and pinion drives and can also be used as contrast lubricant for checking the drive's load pattern.
In the offshore sector, marine applications and wind power stations subject to salt water, open gears, low-speed rolling bearings, sliding and guide rails, steel cables of winches or cranes and similar components can be effectively lubricated and protected using Klüberplex AG 11-461 and 462.

Application notes:

Priming lubrication
Klüberplex AG 11-461 and 462 are applied by brush or spatula.
For optimum results, we recommend cleaning the surfaces to be lubricated prior to lubrication.
To determine the right quantity for your application, the diagram overleaf provides guide values.

Operational lubrication
Klüberplex AG 11-461 and 462 can be applied by manually operated grease guns or through appropriate central lubricating systems and are sprayable at temperatures down to 0 °C.
When applied by spray, an exhaustion device is necessary in order to avoid inhalation of spray mist (see SDS point 2).
Provided sufficient relubrication is ensured, short-term thermal loads of up to 200°C are permissible.The lubricant quantities to be used depend on the operating conditions and must be determined for each application individually. Extended exposure to intense sunlight may slightly change the lubricant's surface color without affecting its performance.

Product data: