产品中心
Product
Kluber 德国克鲁勃 NH1 94-6000 食品加工行业润滑脂 25kg
Klüberfood NH1 94-6000 Grease for the food processing industries 25kg
关键词：
所属分类：
- 产品描述
-
- 商品名称: Kluber 德国克鲁勃 NH1 94-6000 食品加工行业润滑脂 25kg
Klüberfood NH1 94-6000 Grease for the food processing industries 25kg
用于食品加工和制药行业的合成流体齿轮润滑脂。
Klüberfood NH1 94-6000 是一种基于高度精炼合成碳氢化合物和特殊钙复合皂基增稠剂的流体润滑脂。
Klüberfood NH1 94-6000 已通过 NSF H1 注册，因此符合 FDA 21 CFR § 178.3570。该润滑剂专为与食品加工、化妆品、制药或动物饲料行业的产品和包装材料偶然接触而开发。使用 Klüberfood NH1 94-6000 有助于提高生产过程的可靠性。
尽管如此，我们还是建议进行额外的风险分析，例如 HACCP。
由于其特殊的成分，Klüberfood NH1 94-6000 提供了不同寻常的性能特征组合。这种特殊的增稠剂即使在 NLGI 000 非常柔软的稠度下也能提供非常好的磨损保护。同时，Klüberfood NH1 94-6000 提供出色的防腐蚀保护和良好的防水性。这种特殊合成基础材料的组合即使在低温下也能为摩擦点提供最佳的润滑剂。
对您的应用的好处：- 由于在中央润滑系统中非常柔软的稠度和良好的泵送性，优化了摩擦点的润滑剂供应
- 由于良好的承载能力和良好的防腐蚀保护，减少了磨损并延长了维护间隔
- 良好的低温特性使其能够在冷藏环境中使用
- NSF-H1 注册以提高工艺可靠性
- 通过 ISO 21469 认证 - 支持您的生产工厂符合卫生要求。
应用：
Klüberfood NH1 94-6000 专为食品加工和制药行业的机器和安装应用而开发，在这些应用中不能排除与您的产品的偶然接触。Klüberfood NH1 94-6000 用作流体齿轮润滑脂，用于齿轮和蜗轮或链条的浸没润滑，使用软润滑脂可以更平稳地运行。
应用说明：
Klüberfood NH1 94-6000 可通过刷子、抹刀、黄油枪、润滑脂筒或通过中央润滑系统涂抹。在使用 Klüberfood NH1 94-6000 之前，应彻底清洁所有润滑点，以确保 H1 润滑的最大卫生条件。
如果生产过程不允许清洁，我们建议在再润滑期间通过清洗系统来更换现有的润滑脂。
通常应避免过度润滑。
产品数据：文章编号 096115 NSF-H1注册 143 372 化学成分、油品类型 合成烃油 化学成分、增稠剂 复合钙皂 较低的使用温度 -45 °C / -49 °F 最高使用温度 120°C / 248°F 色彩空间 棕色的 质地 同质 质地 短纤维 20 °C 时的密度 约 0.88 克/立方厘米 工作针入度，DIN ISO 2137，25 °C，下限值 435 x 0.1 毫米 工作针入度，DIN ISO 2137，25 °C，上限值 475 x 0.1 毫米 NLGI 等级，DIN 51818 000 25 °C 剪切粘度，剪切速率 300 s-1，设备：旋转粘度计 <= 2 000 毫帕斯 40℃时基础油粘度，计算值 约 60 平方毫米/秒 100℃基础油粘度，计算值 约 10 平方毫米/秒 铜腐蚀，DIN 51811，（润滑脂），24 小时/100°C 1 - 100 腐蚀度 FZG 划痕测试，基于 DIN ISO 14635，A/2,76/50，划痕载荷阶段 >= 12 防水性，DIN 51807 pt。01、3 小时/90 °C，评级 0 - 90 自生产之日起的最短保质期 - 在干燥、无霜的地方和未打开的
原始容器中，大约。12个月 Synthetic fluid gear grease for the food processing and pharmaceutical industries.
Klüberfood NH1 94-6000 is a fluid grease based on a highly refined synthetic hydrocarbon and a special calcium complex soap thickener.
Klüberfood NH1 94-6000 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 94-6000 can contribute to increase reliability of your production processes.
We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.
Due to its special composition, Klüberfood NH1 94-6000 offers an unusual combination of performance characteristics. The special thickener provides very good wear protection even at the very soft consistency of NLGI 000. At the same time, Klüberfood NH1 94-6000 offers excellent corrosion protection along with good water resistance. This combination of special synthetic base materials enables optimum lubricant supply to the friction point also at low temperatures.
Benefits for your application:- Optimised lubricant supply to the friction point due to very soft consistency and good pumpability in central lubrication systems
- Reduced wear and extended maintenance intervals due to good load-carrying capacity and good corrosion protection
- Good low-temperature characteristics enable use in refrigerated environments
- NSF-H1 registration for increased process reliability
- ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant.
Application:
Klüberfood NH1 94-6000 was especially developed for applications in machines and installations of the foodprocessing and pharmaceutical industries where incidental contact with your product cannot be excluded. Klüberfood NH1 94-6000 is used e.g. as a fluid gear grease for the immersion lubrication of toothed and worm gears or chains that run more smoothly with a soft grease.
Application notes:
Klüberfood NH1 94-6000 is applied by brush, spatula, grease gun, grease cartridge or via central lubrication systems. Before applying Klüberfood NH1 94-6000, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions for H1 lubrication.
If the production process does not allow cleaning we recommend the existing grease be replaced by purging the system during relubrication.
Overlubrication should generally be avoided.
Product data:Article number 096115 NSF-H1 registration 143 372 Chemical composition, type of oil synthetic hydrocarbon oil Chemical composition, thickener calcium complex soap Lower service temperature -45 °C / -49 °F Upper service temperature 120 °C / 248 °F Color space brown Texture homogeneous Texture short-fibred Density at 20 °C approx. 0.88 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 435 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 475 x 0.1 mm NLGI grade, DIN 51818 000 Shear viscosity at 25 °C, shear rate 300 s-1, equipment:rotational viscometer <= 2 000 mPas Base oil viscosity at 40 °C, calculated value approx. 60 mm²/s Base oil viscosity at 100 °C, calculated value approx. 10 mm²/s Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C 1 - 100 corrosion degree FZG scuffing test, based on DIN ISO 14635, A/2,76/50, scuffing load stage >= 12 Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating 0 - 90 Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened
original container, approx.12 months
相关产品
暂无数据
相关新闻
免费获取产品报价
