Kluber 德国克鲁勃 ISOFLEX TOPAS L 32 N 专用低温润滑脂 170kg
+
  • Kluber 德国克鲁勃 ISOFLEX TOPAS L 32 N 专用低温润滑脂 170kg

Kluber 德国克鲁勃 ISOFLEX TOPAS L 32 N 专用低温润滑脂 170kg

Klüber ISOFLEX TOPAS L 32 N Special low-temperature grease 170kg

关键词:

所属分类:

产品咨询:

  • 产品描述
    • 商品名称: Kluber 德国克鲁勃 ISOFLEX TOPAS L 32 N 专用低温润滑脂 170kg

    Klüber ISOFLEX TOPAS L 32 N Special low-temperature grease 170kg

    特种低温润滑脂

    • ISOFLEX TOPAS L 32 和 L 32 N 专为极低温度而设计。这些润滑脂由合成烃油和特殊的锂皂组成。ISOFLEX TOPAS L 32 和 L 32 N 耐老化和氧化,并提供良好的防腐蚀保护和防水性。
    • ISOFLEX TOPAS L 32 N 还包含紫外线指示剂,即使在最小润滑量的情况下也能确保质量检查。
    • 内容量:170kg桶装
    • 提供 370g 筒装、400g 喷雾、1kg 罐装、25kg 桶装、170kg 桶装

    对您的应用的好处

    • 超过 -40 °C 的 OEM 要求
    • 由于高腐蚀保护和抗氧化和老化,使用寿命长
    • 多年在汽车行业的成功应用(全球大多数汽车制造商和零部件供应商指定和认可)

    应用

    • 在汽车电气调整机构中使用的小型齿轮的润滑中,尤其使用了L32和L32N等离子体托法。太阳式升降机
      屋顶,座椅,大灯,风扇翼。
    • 这两种产品都得到了著名汽车制造商的认可,例如:
      -大众大众公司(大众大众)
      -戴姆勒公司,6827.40和
      – Daimler DBL 6827.41.
    • 同位素托帕L32和L32N也可用于:
      -导轨、鲍登电缆、门锁
      -小型马达、风扇、泵的滚动轴承
      -塑料/塑料齿轮的齿侧POM、PA和PBT)
      或塑料/钢材料组合。

    技术规格

    条款编号 4130
    降低服务温度 -60 °C / -76 °F
    高服务温度 130 °C / 266 °F
    色彩空间 灰褐色的
    20 °C 时的密度 约 0.88 克/立方厘米
    质地 同质
    质地 短纤维
    NLGI 等级,DIN 51818 2个
    工作针入度,DIN ISO 2137,25 °C,下限值 265 x 0.1 毫米
    工作针入度,DIN ISO 2137,25 °C,上限值 295 x 0.1 毫米
    基础油的运动粘度,DIN 51562 pt。01/ASTM D-445/ASTM D 7042, 40 °C 约 17 平方毫米/秒
    基础油的运动粘度,DIN 51562 pt。01/ASTM D-445/ASTM D 7042, 100 °C 约 3.8 平方毫米/秒
    25℃剪切粘度,剪切速率300s-1,设备:旋转粘度计,下限值 2 000 毫帕斯
    25°C剪切粘度,剪切速率300 s-1,设备:旋转粘度计,上限值 4 500 毫帕斯
    润滑脂的流动压力,DIN 51805-2,测试温度:-35 °C <= 450 毫巴
    落点,DIN ISO 2176,IP 396 >= 185 °C
    速度系数 (nx dm) 1 000 000 毫米/分钟
    防水性,DIN 51807 pt。01、3 小时/90 °C,评级 <= 1 - 90
    润滑脂的腐蚀抑制特性,DIN 51802,(SKFEMCOR),测试持续时间:1 周,蒸馏水 <= 1 腐蚀度
    自生产之日起的最短保质期 - 在干燥、无霜的地方和未打开的原始容器中,大约。 36个月

     

     

     

     

    Special low-temperature greases

    • ISOFLEX TOPAS L 32 and L 32 N have been designed for extremely low temperatures. These greases consist of a synthetic hydrocarbon oil and a special lithium soap. ISOFLEX TOPAS L 32 and L 32 N are resistant to ageing and oxidation and provide good corrosion protection as well as water resistance.
    • ISOFLEX TOPAS L 32 N also contains a UV indicator, which ensures quality checking even with minimum quantity lubrication.
    • Content: 170kg drum
    • Available in 370g cartridge , 400g spray, 1kg can, 25kg bucket, 170kg drum

    Benefits for your application

    • Exceed OEM requirements of -40 °C
    • Long service life due to high corrosion protection and resistance to oxidation and ageing
    • Many years of successful use in the automotive industry (specified and approved by most car manufacturers and component suppliers worldwide)

    Application

    • ISOFLEX TOPAS L 32 and L 32 N are especially used for the lubrication of small gears used in automotive engineering for electrical adjustment mechanisms, e.g. window lifters, sun
      roofs, seats, headlamps, fan flaps.
    • Both products have been approved by renowned car manufacturers, such as
      – Volkswagen VW TL 778 A
      – Daimler DBL 6827.40 and
      – Daimler DBL 6827.41.
    • ISOFLEX TOPAS L 32 and L 32 N can also be used for:
      – guideways, bowden cables, door locks
      – rolling bearings in small motors, fans, pumps
      – tooth flanks in plastic/plastic gears (e.g. POM, PA and PBT)
      or plastic/steel material combinations.

    Technical specifications

    Article number 4130
    Lower service temperature -60 °C / -76 °F
    Upper service temperature 130 °C / 266 °F
    Colour space beige
    Density at 20 °C approx. 0,88 g/cm³
    Texture homogeneous
    Texture short-fibred
    NLGI grade, DIN 51818 2
    Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0,1 mm
    Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0,1 mm
    Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 17 mm²/s
    Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 3,8 mm²/s
    Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 2 000 mPas
    Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 4 500 mPas
    Flow pressure of lubricating greases, DIN 51805-2, test temperature: -35 °C <= 450 mbar
    Drop point, DIN ISO 2176, IP 396 >= 185 °C
    Speed factor (n x dm) 1 000 000 mm/min
    Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating <= 1 - 90
    Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKFEMCOR), test duration: 1 week, distilled water <= 1 corrosion degree
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months

相关产品

暂无数据

暂无数据

相关新闻

免费获取产品报价