Kluber 德国克鲁勃 UH1 14-31 食品工业用润滑脂 25kg桶装
+
  • Kluber 德国克鲁勃 UH1 14-31 食品工业用润滑脂 25kg桶装

Kluber 德国克鲁勃 UH1 14-31 食品工业用润滑脂 25kg桶装

Klübersynth UH1 14-31 Lubricating grease for food industry 25kg bucket

关键词:

所属分类:

产品咨询:

  • 产品描述
    • 商品名称: Kluber 德国克鲁勃 UH1 14-31 食品工业用润滑脂 25kg桶装

    Klübersynth UH1 14-31 Lubricating grease for food industry 25kg bucket

    用于食品加工和制药行业的合成润滑脂。

    Klübersynth UH1 14-31 专为食品加工和制药行业开发。该润滑剂已通过 NSF H1 注册,因此符合 FDA 21 CFR § 178.3570。
    使用 NSF H1 注册润滑剂 Klübersynth UH1 14-31 有助于支持食品安全。这需要考虑的不是孤立的,而是与食品制造厂依法必须履行的其他适当行动相一致,以确保食品安全生产。
    Klübersynth UH1 14-31 以其低温和抗磨性能以及良好的防水性和有效的磨损和腐蚀保护而出类拔萃。

    对您的应用的好处:

    • 由于软稠度和低基础油粘度,即使在低温下也能可靠运行
    • 由于良好的附着力和防腐性能,降低了组件过早失效的风险
    • 集中润滑系统中非常好的泵送性可防止润滑剂不足
    • NSF-H1 注册以获得更高的工艺可靠性


    申请:
    在食品加工和制药工业的机器和设备上使用的是新的KLBEX114-31,最好是在技术上无法避免的与食品接触的润滑点。不过,我们建议在该地区提供所有润滑点,以避免润滑油污染问题。
    当运行极其平稳且需要很大的速度范围时,最好使用全新的KLBISU1-14-31。
    适用于普通轴承和滚动轴承、提升钢瓶、接头、密封件等。以及在冷冻和深冷冻隧道中润滑摩擦点,或在使用软润滑脂时运行更平稳的链条。

    申请须知:
    Klübersynth UH1 14-31 可通过刷子、抹刀、黄油枪或自动润滑系统涂抹。
    Klübersynth UH1 14-31 的工作温度范围为 -45 °C 至 120 °C。对于某些应用,更低的温度也是可能的。润滑膜保持其功能低至约。-70°C。

    产品数据:

     NLGI 等级,DIN 51818  1个
     NSF-H1注册  056356
     较低的使用温度  -45 °C / -49 °F
     最高使用温度  120°C / 248°F
     质地  短纤维
     色彩空间  白色的
     质地  同质
     20 °C 时的密度  约 0.90 克/立方厘米
     工作针入度,DIN ISO 2137,25 °C,下限值  310 x 0.1 毫米
     工作针入度,DIN ISO 2137,25 °C,上限值  340 x 0.1 毫米
     基础油的运动粘度,DIN 51562 pt。01/ASTM D-445/ASTM D 7042, 40 °C  约 30 平方毫米/秒
     基础油的运动粘度,DIN 51562 pt。01/ASTM D-445/ASTM D 7042, 100 °C  约 6 平方毫米/秒
     速度系数 (nx dm)  约 700 000 毫米/分钟
     落点,DIN ISO 2176,IP 396  >= 220 °C
     功能性润滑油膜  >= -70°C °C
     润滑脂的流动压力,DIN 51805,测试温度:-45 °C  <= 1 400 毫巴
     自生产之日起的最短保质期 - 在干燥、无霜的地方和未打开的
     原始容器中,大约。
     24个月

     

     

     

     

    Synthetic smooth-running grease for the food-processing and pharmaceutical industries.

    Klübersynth UH1 14-31 was especially developed for the foodprocessing and pharmaceutical industries. This lubricant is NSF H1-registered and therefore  complies with FDA 21 CFR § 178.3570.
    The use of Klübersynth UH1 14-31, an NSF H1-registered lubricant, is a contributor towards the supporting of food safety. This needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely.
    Klübersynth UH1 14-31 excels by its low-temperature and antiwear properties as well as good water resistance and effective wear- and corrosion protection.

    Benefits for your application:

    • Reliable operation also at low temperatures due to soft consistency and low base oil viscosity
    • Reduced risk of premature component failure due to good adhesion and anticorrosive behaviour
    • Lubricant starvation prevented by very good pumpability in centralised lubricating systems
    • NSF-H1 registration for higher process reliability


    Application:
    Klübersynth UH1 14-31 is used on machines and equipment in the food-processing and pharmaceutical industries, preferably at lubrication points where  technically unavoidable contact with the food product cannot be excluded. However, we recommend supplying all lubrication points in the area with Klübersynth UH1 14-31 so as to avoid problems of lubricant contamination.
    Klübersynth UH1 14-31 should preferably be used when extremely smooth running and a wide speed range are required.
    It is intended for plain- and rolling bearings, lifting cylinders, joints, seals, etc. as well as for the lubrication of friction points in freeze and deep-freeze tunnels or for chains which run more smoothly when lubricated with a soft grease.

    Application notes:
    Klübersynth UH1 14-31 can be applied by brush, spatula, grease gun or automatic lubricating systems.
    Service temperatures of Klübersynth UH1 14-31 range from -45 °C to 120 °C. For certain applications, lower temperatures are also possible. The lubricating film retains its functionality down to approx. -70 °C.

    Product data:

     NLGI grade, DIN 51818  1
     NSF-H1 registration  056356
     Lower service temperature  -45 °C / -49 °F
     Upper service temperature  120 °C / 248 °F
     Texture  short-fibred
     Color space  white
     Texture  homogeneous
     Density at 20 °C  approx. 0.90 g/cm³
     Worked penetration, DIN ISO 2137, 25 °C, lower limit value  310 x 0.1 mm
     Worked penetration, DIN ISO 2137, 25 °C, upper limit value  340 x 0.1 mm
     Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C  approx. 30 mm²/s
     Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C  approx. 6 mm²/s
     Speed factor (n x dm)  approx. 700 000 mm/min
     Drop point, DIN ISO 2176, IP 396  >= 220 °C
     Functional lubricant film  >= -70°C °C
     Flow pressure of lubricating greases, DIN 51805, test temperature:-45 °C  <= 1 400 mbar
     Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened
     original container, approx.
     24 months

相关产品

暂无数据

暂无数据

相关新闻

免费获取产品报价