产品中心

Klüber POLYLUB GLY 801 Special synthetic lubricating grease 25kg

适用于广泛应用的特殊合成润滑脂

• POLYLUB GLY 801 产品系列基于合成烃油、矿物油和特种锂皂。它包含三种润滑脂，可减少滑动轴承、滑道和塑料制成的小齿轮的摩擦和磨损。
• 塑料的润滑在许多方面都很特殊。由于金属和塑料在许多方面的行为不同，因此必须根据塑料调整润滑剂的特性。与许多金属相比，塑料相对柔软。固体润滑剂可能对许多金属摩擦点产生积极影响，但对塑料润滑点可能产生负面影响或根本没有影响。凭借 POLYLUB GLY 801 的配方，克鲁勃润滑剂提供不含固体润滑剂并具有良好附着力的产品。
• 内容量：25kg桶
• 提供 400 克筒装、1 公斤罐装、25 公斤桶装

对您的应用的好处

• 适用于与各种塑料和弹性体相关的许多应用
• 获得汽车行业众多知名制造商和供应商的认可，例如 DBL 6827.60、VW TL 52147、Ford WSD-M1 C244-A、Brose Fettgruppe 11 等
• 集成的 UV 指示器允许可靠的润滑剂检测（波长 366 nm），即使是最小量润滑
• 有助于开关和触点的机械阻尼和降噪。

应用

• 车辆：变速杆、加热和通风系统的移动部件、减震器密封件、横拉杆元件、座椅机构、天窗导轨、踏板。
• 滑动轴承：多种类型的滑动轴承设计。POLYLUB GLY 801 在很大程度上防止粘滑，特别是在通常无法形成流体动力润滑膜的应用中。
• 齿轮：带有塑料金属摩擦部件的小型电动齿轮，以非常低的滑动速度运行的手动齿轮。
• 气动装置：带和不带活塞杆的气动阀和气缸（对于这些应用，最高工作温度不应超过 130 °C）。
• 密封件：各类密封件的润滑密封脂。POLYLUB GLY 和 801 润滑剂也适用于许多其他因金属或塑料表面相对运动而受到磨损的塑料部件。由于良好的阻尼特性，尤其是 POLYLUB GLY 801 和 501，噪音大大降低。

应用说明

• POLYLUB GLY 801 可通过刷子、抹刀或自动计量系统涂抹。

产品数据

Special synthetic lubricating greases for a wide application range

• The product series POLYLUB GLY 801 is based on a synthetic hydrocarbon oil, mineral oil and special lithium soap. It comprises three lubricating greases reducing friction and wear in plain bearings, slideways and small gears made of plastic.
• The lubrication of plastics is special in a number of ways. As the behaviour of metals and plastics differs in many aspects, the lubricants' properties have to be adjusted to the plastic. Compared to many metals, plastics are relatively soft. Solid lubricants, which may achieve a positive effect on many metal friction points, can have a negative or no effect at all on plastic lube points. With the formulation of POLYLUB GLY 801, Klüber Lubrication offers products which are free of solid lubricants, and offer good adhesion.
• Content: 25kg bucket
• Available in 400g cartridget, 1kg can, 25kg bucket

Benefits for your application

• For many applications in connection with various plastics and elastomers
• Approved by many renowned manufacturers and suppliers in the automotive industry, e.g. DBL 6827.60, VW TL 52147, Ford WSD-M1 C244-A, Brose Fettgruppe 11 and many more
• The integrated UV indicator allows a reliable lubricant detection (wave length 366 nm) even with minimum quantity lubrication
• Contributes to mechanical damping and noise reduction of switches and contacts.

Application

• Vehicles: Gearshift linkages, moving parts of the heating and ventilation system, shock absorber seals, tie rod elements, seat mechanisms, sun roof guides, pedals.
• Plain bearings: Many types of plain bearing designs. POLYLUB GLY 801 prevent stick-slip to a large extent, particularly in applications where normally a hydrodynamic lubricating film cannot form.
• Gears: Small electric gears with plastic-metal friction components, manual gears operating at very low sliding speeds.
• Pneumatic installations: Pneumatic valves and cylinders with and without piston rod (for these applications, the upper service temperature should not exceed 130 °C).
• Seals: Lubricating and sealing grease for various types of seals. The POLYLUB GLY and 801 lubricants are also suitable for many other plastic components subject to wear caused by relative movement against metal or plastic surfaces. Owing to good damping properties, especially of POLYLUB GLY 801 and 501, noise is considerably reduced.

Application notes

• POLYLUB GLY 801 are applied by brush, spatula or automatic metering systems.

Product data