产品中心

MEMOLUB ^® MPS-03（多点系统）是一种精确、可靠且易于安装的系统，可以用一个润滑器润滑 3 个润滑点。

可与 MEMOLUB ^® HPS、EPS 或 PLCd一起使用

提供 120cc、240cc 或 480cc 储液罐

每个出口分配 0.6cc 输出

油脂或油

比大型集中式系统成本更低

低维护

所需的所有材料均可快速放置 ^® HPS润滑器在多点应用中的盈利用途。

MPS-03系统由一个内存b ^® 高压力润滑器,一个分配阀,它把润滑油的所有润滑点,安装支架和插入管配件为您的轴承。

所有MEMOLUB ^® MPS 系统在装运前均已涂底漆并可供使用。首次安装 MPS 系统时，所有润滑油管和轴承均应预充注与 MEMOLUB ^®润滑器一起订购的相同润滑油（预充油管可单独购买）。

该系统特别适合多个润滑点距离很近的应用。

油脂或油：
有两种系统类型可供选择；一种用于润滑脂应用，一种用于油应用。订购时，请务必指定适合您的应用的系统。

润滑脂达到 NLGI #2

油系统可能需要额外的止回阀

可选配件：

保护罩： 为了在恶劣的环境中保护您的MEMOLUB ^®润滑器，我们提供尼龙保护罩。该盖单独出售，适用于所有三种尺寸的润滑器。

预填充尼龙管： 完成安装所需的尼龙管单独出售。标准尺寸的管材外径为 5/16”，但也可提供其他尺寸。可以通过两种方式购买管材；预填充的长度为 5 英尺，增量为 5 至 30 英尺，或空的长度为 1 至 100 英尺。

将您的 MEMOLUB ^®润滑器转换为 MPS 系统

有多种轴承适配器可供选择

The MEMOLUB^® MPS-03 (Multi-Point System) is a precise, reliable, and easy to install system that can lubricate 3 lube points with one lubricator.

Can be used with a MEMOLUB^® HPS, EPS or PLCd

Available in 120cc, 240cc or 480cc reservoir

Dispenses 0.6cc output per outlet

Grease or Oil

Less costly than large centralized systems

Low maintenance

All of the materials required are available to quickly put your MEMOLUB^® HPS lubricator to profitable use in a multi-point application.

The MPS-03 System consists of a MEMOLUB^® high pressure lubricator, a distribution valve which meters the lubricant to all lube points, a mounting bracket and push-in tube fittings for your bearings.

All MEMOLUB^® MPS systems have been primed before shipment and are ready for use. On first installation of the MPS system, all lube lines and bearings should be pre-charged with the same lubricant that was ordered with the MEMOLUB^® lubricator (prefilled tubing is available and sold separately).

This system is especially suited for applications with several lube points in close proximity.

Grease or Oil:
There are two system types available; one for grease applications and one for oil applications. When ordering, be certain to specify the system appropriate for your application.

Grease up to an NLGI #2

Oil systems may require additional check valves

Optional Parts:

Protective Cover: To protect your MEMOLUB^® lubricator in harsher evironments we offer a nylon protective cover. This cover is sold seperately and is available for all three size lubricators.

Prefilled Nylon Tubing: Nylon tubing required to complete the installation is sold separately. The standard size tubing is 5/16” OD, but other sizes are available. Tubing can be purchased two ways; pre-filled in 5 foot increments from 5 to 30 feet, or empty in any length from 1 to 100 feet.

Convert your MEMOLUB^® lubricator to a MPS System

Many bearing adapters available