MEMOLUB  MPS-08 多点润滑器
+
  • MEMOLUB  MPS-08 多点润滑器

MEMOLUB MPS-08 多点润滑器

关键词:

所属分类:

产品咨询:

  • 产品描述
  • 规格
    • 商品名称: MEMOLUB MPS-08 多点润滑器

    MEMOLUB ® MPS-08(多点系统)是一种精确、可靠且易于安装的系统,可以用一个润滑器润滑 8 个润滑点。

    • 可与 MEMOLUB ® HPS、EPS 或 PLCd一起使用
    • 提供 120cc、240cc 或 480cc 储液罐
    • 8 个出口分配 0.3cc
    • 油脂或油
    • 比大型集中式系统成本更低
    • 低维护

     

    所需的所有材料均可用于快速将您的 MEMOLUB ® HPS 润滑器在多点应用中投入使用并带来盈利。

    MPS-08 系统包括一个MEMOLUB ®高压润滑器、一个分配阀(用于计量所有润滑点的润滑剂)、一个安装支架和用于轴承的推入式管接头。

    所有MEMOLUB ® MPS 系统在装运前均已涂底漆并可供使用。首次安装 MPS 系统时,所有润滑油管和轴承均应预充注与 MEMOLUB ®润滑器一起订购的相同润滑油(预充油管可单独购买)。

    该系统特别适合多个润滑点距离很近的应用。

    油脂或油:
    有两种系统类型可供选择;一种用于润滑脂应用,一种用于油应用。订购时,请务必指定适合您的应用的系统。

    • 润滑脂达到 NLGI #2
    • 油系统可能需要额外的止回阀

     

    保护罩: 为了在恶劣的环境中保护您的MEMOLUB ®润滑器,我们提供尼龙保护罩。该盖单独出售,适用于所有三种尺寸的润滑器。

    预填充尼龙管: 完成安装所需的尼龙管单独出售。标准尺寸的管材外径为 5/16”,但也可提供其他尺寸。可以通过两种方式购买管材;预填充的长度为 5 英尺,增量为 5 至 30 英尺,或空的长度为 1 至 100 英尺。

    • 将您的 MEMOLUB ®润滑器转换为 MPS 系统
    • 有多种轴承适配器可供选择

     

     

    The MEMOLUB® MPS-08 (Multi-Point System) is a precise, reliable, and easy to install system that can lubricate 8 lube points with one lubricator.

    • Can be used with a MEMOLUB® HPS, EPS or PLCd
    • Available in 120cc, 240cc or 480cc reservoir
    • Dispenses 0.3cc from 8 outlets
    • Grease or Oil
    • Less costly than large centralized systems
    • Low maintenance

    All of the materials required are available to quickly put your MEMOLUB® HPS lubricator to profitable use in a multi-point application.

    The MPS-08 System consists of a MEMOLUB® high pressure lubricator, a distribution valve which meters the lubricant to all lube points, a mounting bracket and push-in tube fittings for your bearings.

    All MEMOLUB® MPS systems have been primed before shipment and are ready for use. On first installation of the MPS system, all lube lines and bearings should be pre-charged with the same lubricant that was ordered with the MEMOLUB® lubricator (prefilled tubing is available and sold separately).

    This system is especially suited for applications with several lube points in close proximity.

    Grease or Oil:
    There are two system types available; one for grease applications and one for oil applications. When ordering, be certain to specify the system appropriate for your application.

    • Grease up to an NLGI #2
    • Oil systems may require additional check valves

    Protective Cover: To protect your MEMOLUB® lubricator in harsher evironments we offer a nylon protective cover. This cover is sold seperately and is available for all three size lubricators.

    Prefilled Nylon Tubing: Nylon tubing required to complete the installation is sold separately. The standard size tubing is 5/16” OD, but other sizes are available. Tubing can be purchased two ways; pre-filled in 5 foot increments from 5 to 30 feet, or empty in any length from 1 to 100 feet.

     

    • Convert your MEMOLUB® lubricator to a MPS System
    • Many bearing adapters available

     

    技术规格 Memolub MPS-08
    运输方式 计量数量
    方面 见图1.2 和 1.3
    电解液
    外部开/关控制 使用 MEMOLUB® EPC、EPS 或 PLCd 润滑器时。
    饲料类型 多点(8 个润滑点)
    筑屋材料 锌、黄铜、不锈钢、聚合物
    润滑油筒容量 120cc、240cc、480cc(可更换)
    润滑油筒类型 可更换墨盒
    润滑油相容性 润滑脂(符合 NLGI #2)或油
    润滑油流量 每个分隔器块出口 .3cc,出口可以交叉端口以增加音量输出。
    安装支架 包括
    安装螺纹尺寸  
    多点兼容  
    手术 机电正排量泵为渐进式分配器块供油。
    运营压力 350 磅/平方英寸(25 巴)
    工作温度范围1 5°F 至 122°F(-15°C 至 50°C)
    输出时序设置 52 种可调音量输出设置(0.63cc/冲程 - 标准)
    电源 所有 MEMOLUB® 型号均可用于多点系统
    远程安装3 见表1.2
    可重复使用的 是的
    兼容分路器块2 不适用
    每天行程 0.5、1、1.5、2、4、12、24
    保修单

     

     

    远程安装 表1.2
    基础油粘度@工作温度。 MPS 系统的推荐管道长度
    100厘沲 33 英尺(10 米)
    700厘沲 24 英尺(7 米)
    1000厘沲 20 英尺(6 米)
    1500 cSt 18 英尺(5 米)
    3000 cSt 15 英尺(5 米)
    5000 cSt 11 英尺(4 米)
    9000 cSt 7 英尺(2 米)
    15000 cSt 3 英尺(1 米)

     

    Technical Specifications Memolub MPS-08
    Delivery Method Metered Quantity
    Dimensions See Figure 1.2 & 1.3
    Electrolyte Liquid No
    External On/Off Control When using the MEMOLUB® EPC, EPS or PLCd lubricators.
    Feed Type Multi-Point (8 lube points)
    Housing Material Zinc, Brass, Stainless Steel, Polymer
    Lubricant Cartridge Capacity 120cc , 240cc, 480cc (Replaceable)
    Lubricant Cartridge Type Replaceable Cartridge
    Lubricant Compatiblity Grease ( to NLGI #2) or Oil
    Lubricant Flow Rate .3cc per divider block outlet, outlets can be cross ported to increase volume output.
    Mounting Bracket Included
    Mounting Thread Size  
    Multi-Point Compatible  
    Operation Electro-Mechanical- Positive Displacement Pump feeds a progressive divider block.
    Operating Pressure 350psi (25 bar)
    Operating Temperature Range 1 5°F to 122°F (-15°C to 50°C)
    Output timing settings 52 Adjustable Volume Output Settings (0.63cc / Stroke - standard)
    Power Supply All MEMOLUB® models are available in Multi-point Systems
    Remote Installation 3 See Table 1.2
    Reusable Yes
    Splitter Block Compatible 2 N/A
    Strokes per day 0.5, 1, 1.5, 2, 4, 12, 24
    Warranty

     

    Remote Installation Table 1.2
    Base-Oil Viscosity @ Working Temp. Recommended tubing length for MPS System
    100 cSt 33ft (10m)
    700 cSt 24ft (7m)
    1000 cSt 20ft (6m)
    1500 cSt 18ft (5m)
    3000 cSt 15ft (5m)
    5000 cSt 11ft (4m)
    9000 cSt 7ft (2m)
    15000 cSt 3ft (1m)

相关产品

相关新闻

免费获取产品报价