MEMOLUB 24VDC-PLCd 单点润滑器
+
  • MEMOLUB 24VDC-PLCd 单点润滑器

MEMOLUB 24VDC-PLCd 单点润滑器

关键词:

所属分类:

产品咨询:

  • 产品描述
  • 规格
    • 商品名称: MEMOLUB 24VDC-PLCd 单点润滑器

    MEMOLUB 24VDC-PLCd-Control 型机电润滑器是单点或多点润滑的终极选择。让您完全控制润滑程序。

    • 与可编程逻辑控制器集成
    • 每个输出周期的控制频率和持续时间
    • 用途广泛;移动设备、机器人、输送机和 OEM ……。
    • 由外部 24VDC 电源供电
    • 可更换墨盒

    MEMOLUB® PLCd 由您的 PLC 供电和编程,并定期自动输送少量、精确的润滑剂,从而将新鲜的润滑剂直接连续供应到您的润滑点。防止与手动润滑相关的过度润滑和润滑不足问题。

    • 120、240 或 480cc 润滑油容量
    • 从开始到结束最大输出压力为 350psi
    • 与油或油脂一起使用(最高 NLGI #2)
    • 远程安装距离润滑点最远 40 英尺

     

    MEMOLUB ® 24VDC-PLCd 控制润滑器采用独特的设计,采用通电备忘录,其中包含为装置供电所需的电气连接。这使用户能够快速拆卸润滑器以快速更换润滑剂盒,同时避免需要断开电气连接。

    Power-Through Memo 上的 5 英尺延长电缆连接到 PLC 控制的电源。PLC程序控制润滑输出周期的频率,这可以基于经过的时钟时间、机器周期、生产的零件的计数或其他期望的标准。

    The MEMOLUB 24VDC-PLCd-Control model electromechanical lubricator is the ultimate in single-point or multi-point lubrication. Gives you complete control of your lubrication program.

    • Integrates with Programmable Logic Controllers
    • Control Frequency and Duration of each Output Cycle
    • Use in a Wide Variety of Applications; Mobile Equipment, Robots, Conveyors and OEM …….
    • Powered by an External 24VDC Power Supply
    • Replaceable Cartridge

    Part Numbers:
    MLPLCD120 - MEMOLUB PLCD Model 120cc
    MLPLCD240 - MEMOLUB PLCD Model 240cc
    MLPLCD480 - MEMOLUB PLCD Model 480cc

     

    The MEMOLUB® PLCd is powered and programmed by your PLC and automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.

    • 120, 240 or 480cc lubricant capacity
    • 350psi max output pressure from start to finish
    • Use with Oil or Grease (up to NLGI #2)
    • Remote mount up to 40 feet from the lube point

    Memolub PLCd - Pillow Block Bearing

    The MEMOLUB® 24VDC-PLCd Control lubricator has a unique design utilizing a Power-Through Memo which contains the electrical connections needed to power the unit. This gives the user the ability to quickly remove the lubricator for fast lubricant cartridge change-out while avoiding need to disconnect the electrical connections.

    A 5-foot extension cable on the Power-Through Memo is connected to a PLC-controlled power supply. The PLC program controls the frequency of lubrication output cycles, which may be based upon elapsed clock hours, machine cycles, a count of parts produced, or other desired criteria.

  • 技术规格 Memolub PLCd
    运输方式 计量数量
    方面 4.0" x 5.3"(标准)、4.0" x 6.6"(巨型)、4.0" x 9.75"(千兆)
    电解液
    外部开/关控制 是的
    饲料类型 单点或多点
    筑屋材料 聚合物
    润滑油筒容量 120cc、240cc、480cc(可更换)
    润滑油筒类型 可更换墨盒
    润滑油相容性 润滑脂(符合 NLGI #2)或油
    润滑油流量 0.63cc/冲程 - 标准
    安装螺纹尺寸 1/4" NPT(M) - (1/8" NPT(M) 可用)
    多点兼容 是的
    手术 机电 - 正排量泵
    运营压力 350 磅/平方英寸(25 巴)
    工作温度范围1 5°F 至 122°F(-15°C 至 50°C)
    输出时序设置 可通过PLC调节
    电源 外接24VDC电源
    远程安装3 长达 40 英尺(12 米)
    可重复使用的 是的
    兼容分路器块2 是的
    每天行程 可通过PLC调节
    保修单 2年

     

    Technical Specifications Memolub PLCd
    Delivery Method Metered Quantity
    Dimensions 4.0" x 5.3" (Standard), 4.0" x 6.6" (Mega), 4.0" x 9.75" (Giga)
    Electrolyte Liquid No
    External On/Off Control Yes
    Feed Type Single-Point or Multi-Point
    Housing Material Polymer
    Lubricant Cartridge Capacity 120cc , 240cc, 480cc (Replaceable)
    Lubricant Cartridge Type Replaceable Cartridge
    Lubricant Compatiblity Grease ( to NLGI #2) or Oil
    Lubricant Flow Rate 0.63cc / Stroke - standard
    Mounting Thread Size 1/4" NPT(M) - (1/8" NPT(M) available)
    Multi-Point Compatible Yes
    Operation Electro-Mechanical - Positive Displacement Pump
    Operating Pressure 350psi (25 bar)
    Operating Temperature Range 1 5°F to 122°F (-15°C to 50°C)
    Output timing settings Adjustable with PLC
    Power Supply External 24VDC power supply
    Remote Installation 3 Up to 40 feet (12 meters)
    Reusable Yes
    Splitter Block Compatible 2 Yes
    Strokes per day Adjustable with PLC
    Warranty 2 Years

相关产品

相关新闻

免费获取产品报价