产品中心

Klüberoil GEM 1-46 N High-performance multipurpose oil 5L

克鲁贝罗油 GEM 1-46 N 

Klüberoil GEM 1 N 是一种基于精选矿物油的高性能多用途润滑油，可满足现代齿轮不断增长的要求和不断提高的功率密度。Klüberoil GEM 1 N 包括KlüberComp Lube Technology *，即它基于特别高级的原材料和先进的添加剂，可在所有齿轮部件的润滑中实现最佳性能

特征

• 高磨损保护
• 为齿轮和滚动轴承提供出色的磨损保护
• 良好的剪切稳定性确保可靠的润滑油膜形成
• 高抗微点蚀
• 优异的抗老化和抗氧化性
• 低发泡倾向
• 良好的弹性体相容性
• 众多齿轮原始设备制造商的认可
• 容积：5l罐
• 提供 400 毫升喷雾罐、5 升罐装、200 升桶装

应用领域

• 摩擦点承受高负荷
• 锥齿轮和蜗轮
• 滚动轴承和滑动轴承
• 主轴、链条、导轨
• 接头和齿形联轴器

技术规格

• 较低的使用温度：-15 °C 
• 最高使用温度：100 °C
• 密度，基于 DIN 51757) 在 15 °C 时：约。870 公斤/立方米
• 运动粘度，DIN 51562 pt。01/ASTM D-445/ASTM D 7042，40 °C：约。46 平方毫米/秒
• 运动粘度，DIN 51562 pt。01/ASTM D-445/ASTM D 7042，100 °C：约。7 平方毫米/秒 
• 粘度指数，DIN ISO 2909：>= 90
• ISO 粘度等级，DIN ISO 3448：46
• 闪点，DIN EN ISO 2592，克利夫兰，开杯装置：>= 200 °C
• 倾点，DIN ISO 3016：<= -20 °C
• 泡沫测试，ASTM-D 892，ISO 6247，顺序 I/24 °C：<= 100/10 ml
• 泡沫测试，ASTM-D 892，ISO 6247，sequence II/ 93.5 °C：<= 100/10 ml
• 泡沫测试，ASTM D 892，ISO 6247，序列 III/24°C：<= 100/10 毫升
• 老化性能，ASTM D 2893，粘度增加：<= 6 %
• FZG 划痕测试，DIN ISO 14635-1，A/8.3/90，划痕载荷阶段：>= 14
• FZG 划痕测试，基于 DIN ISO 14635-1，A/16.6/90，划痕载荷等级：>= 12
• FAG FE8 滚动轴承测试，DIN 51819-3，D 7,5/80-80，滚动体磨损：< 5 mg
• FAG FE8 滚动轴承测试，DIN 51819-3，D 7,5/80-80，保持架磨损：<= 200 mg
• 钢的防腐性能，DIN ISO 7120，方法 A，钢，24 小时/60 °C：无锈蚀等级
• 铜腐蚀，DIN EN ISO 2160，3 小时/100 °C：1 - 100 腐蚀度
• 自生产之日起的最短保质期 - 在干燥、无霜的地方和未开封的原始容器中，大约：60 个月

Klüberoil GEM 1-46 N 

Klüberoil GEM 1 N is a high-performance and multipurpose oil based on selected mineral oils satisfying the growing requirements and increasing power density of modern gears. Klüberoil GEM 1 N includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components

Characteristics

• High scuffing protection
• Excellent wear protection for gears and rolling bearings
• Good shear stability for reliable lubricant film formation
• High micropitting resistance
• Excellent ageing and oxidation resistance
• Low foaming tendency
• Good elastomer compatibility
• Approvals by numerous gear OEMs
• Volume: 5l canister
• Available in 400ml spray can, 5l canister, 200l barrel

Field of application

• friction points subject to high loads in spur
• bevel and worm gears
• rolling and sliding bearings
• spindles, chains, guideways
• joints and toothed couplings

Technical specifications

• Lower service temperature: -15 °C 
• Upper service temperature: 100 °C
• Density, based on DIN 51757) at 15 °C: approx. 870 kg/m³
• Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: approx. 46 mm²/s
• Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: approx. 7 mm²/s 
• Viscosity index, DIN ISO 2909: >= 90
• ISO viscosity grade, DIN ISO 3448: 46
• Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus: >= 200 °C
• Pour point, DIN ISO 3016: <= -20 °C
• Foam test, ASTM-D 892, ISO 6247, sequence I/24 °C: <= 100/10 ml
• Foam test, ASTM-D 892, ISO 6247, sequence II/ 93.5 °C: <= 100/10 ml
• Foam test, ASTM D 892, ISO 6247, sequence III/24°C: <= 100/10 ml
• Ageing properties, ASTM D 2893, increase in viscosity: <= 6 %
• FZG scuffing test, DIN ISO 14635-1, A/8.3/90, scuffing load stage: >= 14
• FZG scuffing test, based on DIN ISO 14635-1, A/16.6/90, scuffing load stage: >= 12
• FAG FE8 rolling bearing test, DIN 51819-3, D 7,5/80-80, wear of rolling element: < 5 mg
• FAG FE8 rolling bearing test, DIN 51819-3, D 7,5/80-80, wear of cage: <= 200 mg
• Anticorrosive properties on steel, DIN ISO 7120, method A, steel, 24 h/60 °C: no rust corrosion degree
• Copper corrosion, DIN EN ISO 2160, 3 h/100 °C: 1 - 100 corrosion degree
• Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx: 60 months