LE 美国 Almagard 多用途润滑剂 3750
LE 美国 Almagard 多用途润滑剂 3750
LE 美国 Almagard 多用途润滑剂 3750
LE 美国 Almagard 多用途润滑剂 3750
LE 美国 Almagard 多用途润滑剂 3750
+
  • LE 美国 Almagard 多用途润滑剂 3750
  • LE 美国 Almagard 多用途润滑剂 3750
  • LE 美国 Almagard 多用途润滑剂 3750
  • LE 美国 Almagard 多用途润滑剂 3750
  • LE 美国 Almagard 多用途润滑剂 3750

LE 美国 Almagard 多用途润滑剂 3750

Lubrication Engineers 生产和销售全系列的高性能润滑油,这些润滑油在各种工业和汽车应用中远远超过传统润滑油。通过显着减少停机时间和维护成本,LE 润滑油还具有成本效益,可以使润滑油的初始价格恢复数倍。 LE 的增强型润滑油由高度精炼或合成的基础油以及以下专有添加剂制成,这些添加剂是 LE 开发的专门用于其润滑油的添加剂。 Almasol®固体减磨添加剂能够承受极重的负载、化学侵蚀和高达 1,900°F (1,038°C) 的温度。它被金属表面吸引,形成微观层,但不会自行堆积或影响间隙。Monolec®液体减磨添加剂可在金属表形成单分子润滑膜,从而在不影响间隙的情况下大大提高膜强度。 Duolec®双效添加剂赋予润滑剂协同特性,提供减少磨损和极压保护。它可以提高薄膜强度,并通过温度激活提供保护层。 Quinplex®抗冲击添加剂具有出色的耐水性、粘性和机械稳定性,并有助于形成防腐蚀屏障。 LE 不满足于现有的成就,其先进的技术中心致力于全职研发,确保我们的客户能够将有效的技术融入到 LE 产品线中。

关键词:

LE 美国

LE 3750

3750 多用途润滑剂

锂复合物

所属分类:

产品咨询:

  • 产品描述
    • 商品名称: LE 美国 Almagard 多用途润滑剂 3750

    Lubrication Engineers 生产和销售全系列的高性能润滑油,这些润滑油在各种工业和汽车应用中远远超过传统润滑油。通过显着减少停机时间和维护成本,LE 润滑油还具有成本效益,可以使润滑油的初始价格恢复数倍。 LE 的增强型润滑油由高度精炼或合成的基础油以及以下专有添加剂制成,这些添加剂是 LE 开发的专门用于其润滑油的添加剂。 Almasol®固体减磨添加剂能够承受极重的负载、化学侵蚀和高达 1,900°F (1,038°C) 的温度。它被金属表面吸引,形成微观层,但不会自行堆积或影响间隙。Monolec®液体减磨添加剂可在金属表形成单分子润滑膜,从而在不影响间隙的情况下大大提高膜强度。 Duolec®双效添加剂赋予润滑剂协同特性,提供减少磨损和极压保护。它可以提高薄膜强度,并通过温度激活提供保护层。 Quinplex®抗冲击添加剂具有出色的耐水性、粘性和机械稳定性,并有助于形成防腐蚀屏障。 LE 不满足于现有的成就,其先进的技术中心致力于全职研发,确保我们的客户能够将有效的技术融入到 LE 产品线中。

    持久的红色润滑脂保持原状并保持凉爽运行
    LE 美国 多用途润滑剂 3750依赖 Almagard 多用途润滑剂的客户欣赏其凉爽运行、持久、防水的性能。它可显着延长润滑间隔,消除轴承故障,可将轴承寿命延长三倍,并且不会随着时间的推移而硬化。
    建议用于长期使用的应用,LE 3750 Almagard 非常粘,即使在恶劣的条件下也不会被洗掉、敲打或融化和流动。它非常适合在和发生高冲击的越野设备以及许多厂内应用。


    好处和建议

    可用容器尺寸

    鼓,四分之一鼓,桶

    全球统一制度声明

    仅供商业和专业用途

    有益的品质

    承受压力并减少磨损

    • 表现出卓越的极压特性
    • 提供卓越的抗磨损保护
    • 表现出持久的机械稳定性,在工作数千次后不会改变一致性
    • 在其整个使用寿命期间保持密封,防止外部污染物进入
    • 保护昂贵的轴承表面(甚至青铜和合金)免于生锈和腐蚀

    保持原状

    • 牢固地粘附在金属上,抵抗反复冲击
      • 不会敲打或甩出
    • 即使在高湿度环境下也能保持在接触区域
      • 不会被洗掉轴承

    承受炎热和寒冷

    • 在广泛的温度范围内表现良好
    • 滴点高达 282°C (540°F)
    • 抗氧化,不会熔化并从轴承中流出
    • 3750(NLGI 0 级)在低至 -29°C (-20°F) 的温度下提供可靠的泵送性

    可用等级

    • NLGI 2 (3752)
    • NLGI 1 (3751)
    • NLGI 0 (3750)

    专有添加剂

    LE 的专有添加剂专门用于 LE 润滑油。Almagard 多用途润滑剂含有 Almasol 和 Quinplex。
    Almasol®固体减磨添加剂能够承受极重的负载、化学侵蚀和高达 1,900°F (1,038°C) 的温度。它被金属表面吸引,形成微观层,但不会自行堆积或影响间隙。Almasol 最大限度地减少金属与金属的接触以及由此产生的摩擦、热量和磨损。
    Quinplex®抗冲击添加剂具有出色的耐水性、粘性和增强的机械稳定性,并有助于形成防腐蚀屏障。

    达到或超过性能要求

    • 3752:Mack MG-C、Stord Rotadisc-Driers 和 Sweco-Vibro 设备

    推荐

    • 3751可用于抗摩擦轴承高达6,000转。
    • 3752可用于抗摩擦轴承高达3,000转。

    典型应用

    • 车架
    • 车轮轴承
    • 前轴安排
    • U型关节
    • 水桶别针
    • 背带

    物理特征-典型

    增稠剂类型

    锂复合物

    质地

    光滑/钉

    颜色

    红色的

    Nlgi级

    0

    性能测试结果

    60次穿透ASTM217

    365

    温度c(温度f),ASTM2265

    218 (425)

    粘度为:100℃,科技委,美国标准测试和测试系统D445

    11.70

    粘度@40°C,科技委,美国标准技术测试局

    144.0

    100小时,美国STMD942

    5

    1,000小时,ASTMD942

    —

    防腐蚀海H 2 O,ASTMD5969

    通行证

    防腐蚀 2 O,ASTMD1743

    通行证

    铁姆肯公司 OK 负载磅,ASTM D2509

    70

    喷水损失%,ASTM D4049

    —

    long-lasting Red Grease Stays Put & Runs Cool
    Customers who rely upon Almagard Vari-Purpose Lubricant appreciate its cool-running, long-lasting, water-resistant performance. It dramatically lengthens grease intervals, eliminates bearing failures, can extend bearing life by up to threefold, and does not harden with age.
    Recommended for extended service applications, Almagard is extremely tacky and will not wash off, pound out or melt and run, even in severe conditions. It is ideal for on-and off-road equipment where high impact occurs, as well as many in-plant applications.

    Benefits and Recommendations

    Available Container Size

    Drum

    GHS Statement

    For commercial and professional use only

    Beneficial Qualities

    Withstands Pressure & Reduces Wear

    • Demonstrates superior extreme pressure characteristics
    • Provides exceptional anti-wear protection
    • Exhibits long-lasting mechanical stability, does not change consistency after being worked thousands of times
    • Maintains a seal against outside contaminants throughout its lifetime
    • Protects costly bearing surfaces - even bronze and alloy - from rust and corrosion

    Stays Put

    • Clings tenaciously to metal, resisting repeated impact
      • Won't pound out or sling off
    • Stays in contact zone, even in high-moisture environments
      • Won't wash out of bearings

    Takes the Heat & the Cold

    • Performs well in a broad temperature range
    • Has a dropping point of up to 282ºC (540ºF)
    • Resists oxidation and won't melt and run from bearings
    • 3750 (NLGI Grade 0) offers reliable pumpability at temps as low as -29ºC (-20ºF)

    Available Grades

    • NLGI 2 (3752)
    • NLGI 1 (3751)
    • NLGI 0 (3750)

    Proprietary Additives

    LE’s proprietary additives are used exclusively in LElubricants. Almagard Vari-Purpose Lubricant contains Almasol and Quinplex.
    Almasol® solid wear-reducing additive is able to withstand extremely heavy loads, chemical attack and temperatures up to 1,900°F (1,038°C). It is attracted to metal surfaces, forming a microscopic layer but not building on itself or affecting clearances. Almasol minimizes metal-to-metal contact and the resulting friction, heat and wear.
    Quinplex® impact-resistant additive contributes to outstanding water resistance, tackiness and enhanced mechanical stability, and helps to form a barrier against corrosion.

    Performance Requirements Met or Exceeded

    • 3752: Mack MG-C, Stord Rotadisc-Driers & Sweco-Vibro Equipment

    Recommendation

    • 3751 can be used in anti-friction bearings up to 6,000 rpm.
    • 3752 can be used in anti-friction bearings up to 3,000 rpm.

    Typical Applications

    • Chassis
    • Wheel bearings
    • Front axle arrangements
    • U-joints
    • Bucket pins
    • Bearings

    Physical Characteristics - Typical

    Thickener Type

    Lithium Complex

    Texture

    Smooth w/tack

    Color

    Red

    NLGI Grade

    0

    Performance Test Results

    Worked 60 Penetration ASTM D217

    365

    Dropping Point ºC(ºF), ASTM D2265

    218 (425)

    Viscosity @ 100°C, cSt, ASTM D445

    11.70

    Viscosity @ 40°C, cSt, ASTM D445

    144.0

    Oxidation drop in psi @ 100 hrs, ASTM D942

    5

    Oxidation drop in psi @ 1,000 hrs, ASTM D942

    —

    Corrosion Prevention Sea H2O, ASTM D5969

    Pass

    Corrosion Prevention DI H2O, ASTM D1743

    Pass

    Timken OK Load lbs, ASTM D2509

    70

    Water Spray-off % Loss, ASTM D4049

    —

相关产品

相关新闻

免费获取产品报价