WACKER 瓦克硅油  瓦克STABILIZER 43硅橡胶RTV-2模具制作0.5kg/罐
+
  • WACKER 瓦克硅油  瓦克STABILIZER 43硅橡胶RTV-2模具制作0.5kg/罐

WACKER 瓦克硅油 瓦克STABILIZER 43硅橡胶RTV-2模具制作0.5kg/罐

关键词:

所属分类:

产品咨询:

  • 产品描述
    • 商品名称: WACKER 瓦克硅油 瓦克STABILIZER 43硅橡胶RTV-2模具制作0.5kg/罐

    WACKER® STABILIZER 43 - RTV-2 硅橡胶/模具制造
    产品说明
    该添加剂用于增稠 ELASTOSIL® M“46..”高强度系列牌号的增稠剂或使其不流挂,这些牌号在供应时是可流动的。
    效果是,例如,在制作表皮模具时,甚至可以通过刷子或抹刀将硅橡胶涂敷到倾斜或垂直表面,而不会流淌或流挂。
    添加到橡胶体中的添加剂越多,TEM 体变得越厚。
    因此,可以获得整个范围的触变状态,包括完全非流挂状态。

    WACKER® STABILIZER 43 是一种无色、浑浊、中等粘度的液体,具有微弱的气味。
    它专门用于增稠"弹性橡胶M46型"添加固化RTV-2型硅橡胶。."可流通的系列。
    加工
    添加0.3-0.5重%的瓦克尔(43)稳定剂(确切比例取决于橡胶的等级)可使该橡胶具有极好的非凹陷性能。
    催化混合物,至少适用于最多10毫米厚度的层,当应用于垂直表面。

    我们建议在添加剂中尽可能均匀地混合以下步骤:
    1.称出硅橡胶底座或组件A
    2.增加所需的催化剂或成分B的比例
    3.彻底混合质量
    4.称出并加入添加剂
    5.彻底混合质量
    当加工少量硅橡胶时,最好通过一次性移液器添加添加剂(20 滴 ≈ 1 克)。

    储存
    每批次的“最佳使用期限”日期显示在产品标签上。
    超过标签上指定日期的存储并不一定意味着该产品不再可用。
    然而,在这种情况下,出于质量保证的原因,必须检查预期用途 所需的性能

     

    WACKER® STABILIZER 43 - RTV-2 SILICONE RUBBER / MOLD MAKING
    Product description
    This additive is used to thicken or render non-sag those grades of the ELASTOSIL® M "46.." high-strength series which are flowable as supplied. The
    effect is such that, when - for example - a skin mold is being made, the silicone rubber can be applied even to inclined or vertical surfaces by brush or spatula without flowing off or sagging.
    The more additive added to the rubber mass, the thicker tem mass becomes.
    Thus, the whole range of thixotropic states can be attained, including the fully non-sag state.

    WACKER® STABILIZER 43 is a colorless, cloudy,medium-viscosity liquid with a faint odor.
    It is exclusively used to thicken those addition-curing RTV-2 silicone rubber grades of the "ELASTOSIL® M 46 .." series which are flowable as supplied.
    Processing
    Addition of 0.3 - 0.5 wt % of WACKER® STABILIZER 43 (the exact proportion depending on the grade of rubber) confers excellent non-sag properties on the
    catalyzed mix, at least for layers of up to 10 mm thickness, when applied to vertical surfaces.

    We recommend the following procedure for mixing in the additive as homogeneously as possible:
    1. Weigh out the silicone rubber base or Component A
    2. Add the required proportion of Catalyst or Component B
    3. Mix the mass thoroughly
    4. Weigh out and add the additive
    5. Mix the mass thoroughly
    When small quantities of silicone rubber are processed, the additive is best added via a disposable pipette (20 drops ≈ 1 g).

    Storage
    The 'Best use before end' date of each batch is shown on the product label.
    Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required
    for the intended use must be checked for quality assurance reasons

相关产品

暂无数据

暂无数据

相关新闻

免费获取产品报价